Panel Upgrades in Ventura County
Most 200 amp upgrades run $4,000 to $5,000. You get a fixed written price before any work starts, and photos of your panel and meter are often enough to give you one.
California C10 license #889112. Lifetime guarantee on craftsmanship.

What a 200 amp panel upgrade costs
Most panel upgrades from 100 or 125 amps to 200 amps cost $4,000 to $5,000, and most of our jobs land at $4,200. That is based on 28 panel upgrades we quoted in 2026. You get a fixed written price before any work starts, and photos of your panel and meter are often enough to give you one.
| Your job | Typical price |
|---|---|
| 100 or 125 amps to 200 amps, panel replaced in the same spot | $4,000 to $4,500, most at $4,200 |
| Overhead or underground service | Same price |
| Zinsco or Federal Pacific panel replaced | Same price |
| Meter main combination panel | About $4,450 |
| Adding a new sub panel | $4,600 to $5,500 |
| Moving the service to a new spot | $4,350 to $5,000 |
| Several of these on one job | Up to about $6,800 |
Prices updated November 2026. These are typical prices from jobs we quoted in 2026, not a quote for your home. They do not include city or county permit and inspection fees, which we pass through at cost, our $350 fee for pulling and managing the permit, or any fees SCE charges. On our 2026 jobs, permit fees ran about $175 to $650 depending on the city. Stucco patching is not included.
Zinsco and Federal Pacific panels
These panels are a known fire risk, and we replace them at the same price as any other upgrade. We do not add circuits, chargers or generator hookups to them. If your home has one, replacing it is the first step.
Rewiring an older home too? See our home rewiring page for rewire prices and how we protect your home.

Everything in the price
- A new 200 amp panel in place of your old one
- On overhead service, a new mast and weatherhead, always included
- New breakers and a grounding system that meets current code
- We handle the permit, schedule the inspection and meet the inspector (permit fees and our $350 permit fee are extra)
- Coordination with SCE to disconnect and reconnect your power
- Lifetime guarantee on craftsmanship
How it works
-
Send photos
Send us photos of your panel, your meter and where the power comes into the house, or we come take a look.
-
Get a fixed price
You get a fixed written price.
-
Permit and SCE
We pull the permit and set the date with SCE. For the SCE application we need the legal owner’s full name as it appears on the title, plus a phone number and email.
-
Install day
The power is off while we work. Permanent power is usually back the same day, or by the end of the second day. Our crew arrives between 7:00 and 7:30 AM. Please clear the area around the panel and take anything off the inside of that wall, since breaking out the stucco causes vibration.
-
Inspection
The city or county inspects, usually on install day, and then SCE reconnects your power.
Panel upgrade questions
Do you need a panel upgrade?
Not always. Common reasons are an old Zinsco or Federal Pacific panel, a 100 amp service that can’t carry an EV charger, heat pump or induction range, breakers that trip often, or a panel with no room left. Sometimes a smaller fix does the job, and we will tell you if that is the case.
How long does a panel upgrade take?
The work itself is usually one day. Permit approval and SCE scheduling come first and set the start date.
Is underground service more expensive?
No. On our 2026 jobs, underground and overhead upgrades came in at the same price.
Do you handle the permit and SCE?
Yes. We apply for the permit, schedule the inspection, and work with SCE on the disconnect and reconnect.
Can you give me a price from photos?
Usually, yes. Send photos of the panel with the door open, the label inside the door, the meter, and where the wires come into the house.
Can SCE Charge Ready help pay for a panel upgrade?
Often, yes. If your panel is under 200 amps and you are adding an EV charger, SCE’s Charge Ready Home rebate pays toward a new 200 amp panel and a 240 volt EV circuit. Income qualified homes can get up to $4,200, and homes in disadvantaged communities can get 50% back, up to $2,100. SCE decides your amount. See our SCE Charge Ready page.
Where do you work?
We work across Ventura County and southern Santa Barbara County, including Ventura, Oxnard, Camarillo, Port Hueneme, El Rio, Ojai, Oak View, Mira Monte, Santa Paula, Fillmore, Somis, Moorpark, Simi Valley, Santa Rosa Valley, Thousand Oaks, Newbury Park, Westlake Village, Oak Park, Carpinteria, Summerland, Montecito, Santa Barbara and Goleta.
Call (805) 650-9054, Monday to Friday, 8 am to 4 pm, or send us photos for an estimate. California C10 license #889112. Lifetime guarantee on craftsmanship.
Get your fixed price
Send us photos of your panel, your meter and where the power comes into the house, and we will send back a fixed written price.
