EV Charger Installation
Serving Ventura County, California
EV Charger Installation, Done Right the First Time
Charge at home or at your business on a dedicated, code-compliant circuit installed by licensed electricians who handle the permit, the panel, and the inspection.
Home & Commercial EV Charging
Reliable charging starts with the wiring behind it
An EV charger is only as safe and fast as the circuit that feeds it. A charging station draws a large, sustained load for hours at a time, so the wire size, breaker, connections, and panel capacity all have to be sized correctly. Infinity Electric installs home and commercial EV charging across Ventura County the right way: a proper load calculation up front, a dedicated circuit, tidy conduit, and a permitted, inspected finish. Whether you just bought your first EV or you are adding stations to a workplace parking lot, we make sure your charging is dependable for years, not just for the first plug-in.
Common Problems & Warning Signs
When home charging needs a professional
Plugging a new EV into a standard outlet or an undersized circuit can create real hazards. If any of these sound familiar, it is worth having a licensed electrician take a look before you keep charging.
Slow overnight charging
A 120-volt outlet may add only a handful of miles per hour. If your car is never full by morning, you likely need a dedicated Level 2 circuit.
Warm outlets or plugs
A cord end, outlet, or breaker that feels hot to the touch is a sign the circuit is overloaded and not rated for continuous EV charging.
Tripping breakers
Breakers that trip while charging, or lights that dim when the car plugs in, point to a circuit that cannot handle the sustained load.
An older or full panel
Homes with an older service or a panel with no open spaces often need a load review before a charger can be added safely.
Extension cords & adapters
Running a charger through an extension cord or power strip is a fire risk. EV chargers need their own hardwired or dedicated outlet circuit.
Scorch marks or odors
Any discoloration, melting, or burning smell near an outlet used for charging needs immediate attention from a licensed electrician.
What We Install
EV charging services and installation options
From a single garage charger to a full commercial charging bank, we size and install the right solution for your property, your panel, and the vehicles you drive.
Level 2 home chargers
Dedicated 240-volt charging that fully recharges most EVs overnight. We install both hardwired units and plug-in stations on a properly sized circuit.
Smart & networked chargers
Wi-Fi connected units with scheduling, energy monitoring, and app control. Ideal if you want to charge during off-peak hours or track usage.
Load-managed installs
When panel capacity is tight, a load-management device or circuit sharing lets you add charging without an immediate service upgrade.
Panel & circuit upgrades
Sub-panels, new breakers, and service upgrades when your existing panel does not have the room or capacity for a charging circuit.
Commercial & multi-unit
Workplace, retail, and multi-family charging, including multiple stations, conduit infrastructure, and equipment built for higher use.
Solar & battery pairing
Charging that works with a solar and battery system, so you can power your vehicle from what you generate. See our solar services.
How It Works
Our step-by-step installation process
A clear, no-surprises process from first call to final inspection.
Assessment & load calculation
We review your panel, service size, and charging goals, then run a load calculation to confirm what your electrical system can support.
Recommendation & quote
You get straight answers on charger type, circuit size, and any panel work needed, plus a written quote before anything begins.
Permitting
We pull the electrical permit with your local jurisdiction so the installation is documented and legal.
Professional installation
We install the dedicated circuit, run clean conduit, mount the charger, and make secure, correctly torqued connections.
Testing & walkthrough
We test the circuit and the charger, then walk you through operation, scheduling, and safe use before we leave.
Final inspection
We coordinate the inspection so your new charging circuit is signed off and ready for years of reliable use.
Residential & Commercial
Charging for homes and businesses
The right charging setup looks different for a single-family garage than it does for a workplace parking lot. We install both, and we scope each project around how the space is actually used.
Residential
- Attached and detached garage installations
- Outdoor and carport charging with weather-rated equipment
- Second-charger and two-EV households
- Charging paired with solar and battery storage
Commercial
- Workplace and employee charging
- Retail, hospitality, and customer-facing stations
- Multi-family, HOA, and apartment parking
- Fleet and multi-charger load-managed systems
Image placeholder — see image brief #2 (commercial charging stations)
Safety, Permits & Code
Installed to code, permitted, and inspected
EV charging circuits are covered by the National Electrical Code and by local requirements. Doing it by the book protects your home, your warranty, and the next owner of your property.
Permits & inspection
Most hardwired chargers require an electrical permit and a final inspection. We handle both, so the work is documented and approved by your local building department.
Correct circuit sizing
EV charging is a continuous load, so the code requires the circuit to be sized above the charger’s rated draw. We size wire and breakers accordingly, not to the bare minimum.
GFCI & disconnects
Depending on the charger and location, code may call for GFCI protection and an accessible disconnect. We install the required protection for both indoor and outdoor units.
Load calculations
Before adding a charger, we confirm your service can carry the new load. If it cannot, we lay out safe options rather than overloading the panel.
Permit fees, timelines, and specific requirements vary by jurisdiction within Ventura County. We confirm the details for your address before we begin.
Equipment Options
Choosing the right charger for your setup
Not sure which charger you need? Here is how the common options compare. We can install a unit you already own or help you pick one that fits your vehicle, panel, and habits.
| Option | Power | Typical use | Best for |
|---|---|---|---|
| Level 1 | 120V standard outlet | Slow trickle charging, a few miles of range per hour | Plug-in hybrids or very low daily mileage |
| Level 2 (plug-in) | 240V dedicated circuit | Full overnight charging for most EVs | Homeowners who want a movable unit on a NEMA outlet |
| Level 2 (hardwired) | 240V dedicated circuit | Full overnight charging, cleanest permanent install | Outdoor installs, higher-amperage units, long-term homes |
| Smart / networked | 240V with connectivity | Scheduling, energy tracking, off-peak charging | Time-of-use rate plans and multi-charger sites |
| Commercial / DC options | Higher-capacity equipment | Workplace, retail, and fleet charging | Businesses and multi-unit properties |
Most home chargers use the universal J1772 connector, and Tesla vehicles include an adapter, so a Level 2 station works with virtually any EV on the road.
Why It Matters
Why hire a licensed electrical contractor
EV chargers pull a heavy, continuous load, often for six to twelve hours at a stretch. That is exactly the kind of circuit that punishes shortcuts. A licensed electrical contractor brings more than a drill and a ladder:
Image placeholder — see image brief #3 (electrician at the panel)
- Proper load calculations so your service is not overloaded
- Correctly sized wire, breakers, and connections rated for continuous duty
- Permits pulled and inspections passed, protecting your home’s insurance and resale
- Work that meets the National Electrical Code and local Ventura County requirements
- Accountability and workmanship you can call back on
Uninspected or DIY charging installs are a common cause of overheated connections. A professional install is the difference between a charger you never think about and one that becomes a problem.
Why Infinity Electric
A local electrical team that stands by its work
Homeowners and businesses across Ventura County call us for EV charging because we treat it as the electrical project it really is, not a quick add-on.
Licensed electricians
Your charging circuit is installed by qualified, licensed electrical professionals, not a general handyman.
Local to Ventura County
We know the local jurisdictions and inspection process, which keeps permitting smooth.
Honest recommendations
If you do not need a panel upgrade, we will tell you. We scope the job to what your home actually needs.
Craftsmanship guarantee
We stand behind the quality of our work with our craftsmanship guarantee on every project.
Licensed California C10 electrical contractor — License #889112 — with 22 years in business. Every EV charging installation is backed by our Craftsmanship Lifetime Guarantee.
Where We Work
EV charger installation across Ventura County
We install home and commercial EV charging throughout the Ventura County, California area, including these communities and the surrounding neighborhoods:
- Ventura
- Oxnard
- Camarillo
- Thousand Oaks
- Simi Valley
- Moorpark
- Newbury Park
- Ojai
- Santa Paula
- Fillmore
- Port Hueneme
- Westlake Village
Not sure if you are in range? Reach out and we will let you know.
Questions, Answered
EV charger installation FAQ
Do I need a permit to install an EV charger at home?
In most Ventura County jurisdictions, a hardwired Level 2 charger requires an electrical permit and a final inspection. We pull the permit, install to code, and schedule the inspection so your charging circuit is properly documented and safe.
Will my electrical panel support an EV charger?
Many panels can, but it depends on your panel’s rating and existing load. We run a load calculation before installation. If capacity is tight, options include a dedicated circuit, a smart charger with load management, or a panel upgrade.
How long does an EV charger installation take?
A straightforward Level 2 install on a garage wall near the panel is often finished in a single visit. Longer conduit runs, subpanels, panel upgrades, or trenching to a detached garage add time. We confirm the scope during the site assessment.
What is the difference between Level 1 and Level 2 charging?
Level 1 uses a standard 120-volt outlet and adds only a few miles of range per hour. Level 2 uses a dedicated 240-volt circuit and charges several times faster, which is why most homeowners choose a Level 2 station for overnight charging.
Can you install a charger for a business or multi-unit property?
Yes. We install commercial and multi-family charging, including networked stations, load-managed multi-charger setups, and equipment suited to workplaces, retail, and HOA parking. Commercial projects may involve additional utility coordination and accessibility requirements.
Which EV chargers do you install?
We install hardwired and plug-in Level 2 chargers from major brands, as well as universal J1772 stations that work with any EV sold in North America. We can install a unit you already purchased or help you choose one that fits your vehicle, panel, and charging habits.
Ready to charge at home or at work?
Talk to a licensed Infinity Electric electrician about the right EV charging setup for your property in Ventura County. Straight answers, clean installs, and a permitted, inspected finish.
